ROMIL-UpA^™ Ultra Purity Acids & Reagents

Detailed Specifications

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Recommended Shelf Lives and Storage Conditions

(Acetic Acid glacial)
Code SS62
Standard Pack 500ml (FEP)
R:10-35 S:23c-26-45 EC:[200-580-7]
CH3COOH MW 60.05 FP 16.7°C BP 117.9°C d 1.05 CAS [64-19-7]
Assay >99%
Trace elemental impurities: parts per trillion level
Batch values reported on accompanying Certificate of Analysis
Application: Ultra trace inorganic analysis

Ammonia solution UpA
(Ammonium Hydroxide solution)
Code SS72
Standard Pack 500ml (HDPE)
R:34 S:26-36/37/39-45-61 EC:[215-647-6]
NH3 MW 17.03 d 0.92 CAS [1336-21-6]
Assay 20-22%
Trace elemental impurities: parts per trillion level
Batch values reported on accompanying Certificate of Analysis
Application: Ultra trace inorganic analysis

Typical values, elemental impurities at time of manufacture (ppt):
Ag	<1	Cu	<5	La	<0.1	Pt	<1	Th	<0.1
Al	<10	Dy	<0.1	Li	<1	Rb	<1	Ti	<5
As	<10	Er	<0.1	Lu	<0.1	Re	<1	Tl	<1
Au	<5	Eu	<0.1	Mg	<5	Rh	<1	Tm	<0.1
Ba	<5	Fe	<10	Mn	<5	Ru	<10	U	<0.1
Be	<5	Ga	<1	Mo	<1	Sb	<10	V	<2
Bi	<0.1	Gd	<0.1	Na	<10	Sc	<2	W	<5
Ca	<10	Ge	<1	Nb	<1	Se	<50	Y	<1
Cd	<1	Hf	<0.1	Nd	<0.1	Sm	<1	Yb	<0.1
Ce	<0.1	Hg	<200	Ni	<5	Sn	<5	Zn	<5
Co	<1	Ho	<0.1	Pb	<2	Sr	<1	Zr	<1
Cr	<5	In	<1	Pd	<20	Tb	<0.1
Cs	<0.1	K	<10	Pr	<0.1	Te	<1

Ammonium Hydroxide solution (see Ammonia solution)

Hydrobromic Acid UpA
Code SS82
Standard Pack 500ml (FEP)
R:34-37 S:7/9-26-45 EC:[233-113-0]
HBr MW 80.91 d 1.48 CAS [10035-10-6]
Assay 44-49%
Trace elemental impurities: parts per trillion level
Batch values reported on accompanying Certificate of Analysis
Application: Ultra trace inorganic analysis

Typical values, elemental impurities at time of manufacture (ppt):
Ag	<2	Cu	<5	Lu	<0.01	Re	<5	Tl	<0.1
Al	<50	Dy	<0.01	Mg	<5	Rh	<1	Tm	<0.01
Au	<1	Er	<0.01	Mn	<2	Ru	<10	U	<0.01
B	<1000	Eu	<0.01	Mo	<10	Sb	<50	V	<1
Ba	<1	Fe	<50	Na	<30	Sc	<1	W	<10
Be	<5	Ga	<10	Nb	<1	Sm	<0.01	Y	<1
Bi	<0.1	Gd	<0.01	Nd	<0.05	Sn	<20	Yb	<0.01
Ca	<50	Hf	<0.05	Ni	<10	Sr	<1	Zn	<5
Cd	<1	Ho	<0.01	Pb	<1	Ta	<20	Zr	<1
Ce	<0.05	In	<1	Pd	<10	Tb	<0.01
Co	<1	K	<20	Pr	<0.05	Te	<10
Cr	<10	La	<0.05	Pt	<1	Th	<0.05
Cs	<0.05	Li	<1	Rb	<1	Ti	<10

Hydrochloric Acid UpA
Code SS42
Standard Pack 500ml (PFA)
R:34-37 S:26-45 EC:[231-595-7]
HCl MW 36.46 d 1.18 CAS [7647-01-0]
Assay 32-35%
Trace elemental impurities: parts per trillion level
Batch values reported on accompanying Certificate of Analysis
Application: Ultra trace inorganic analysis

Typical values, elemental impurities at time of manufacture (ppt):
Ag	<5	Cs	<0.05	La	<0.05	Pt	<1	Te	<1
Al	<10	Cu	<3	Li	<1	Rb	<1	Th	<0.05
As	<20	Dy	<0.01	Lu	<0.01	Re	<0.1	Ti	<10
Au	<10	Er	<0.01	Mg	<5	Rh	<1	Tl	<0.1
B	<10	Eu	<0.01	Mn	<2	Ru	<10	Tm	<0.01
Ba	<1	Fe	<10	Mo	<5	Sb	<20	U	<0.01
Be	<5	Ga	<1	Na	<5	Sc	<1	V	<1
Bi	<0.05	Gd	<0.01	Nb	<1	Se	<50	W	<5
Ca	<10	Hf	<0.05	Nd	<0.05	Sm	<0.01	Y	<0.1
Cd	<0.1	Hg	<20	Ni	<10	Sn	<10	Yb	<0.01
Ce	<0.05	Ho	<0.01	Pb	<1	Sr	<1	Zn	<5
Co	<3	In	<0.1	Pd	<10	Ta	<20	Zr	<1
Cr	<10	K	<10	Pr	<0.05	Tb	<0.01

Hydrofluoric Acid UpA
Code SS52
Standard Pack 500ml (PFA)
R:26/27/28-35 S:7/9-26-36/37-45 EC:[231-634-8]
HF MW 20.01 d 1.16 CAS [7664-39-3]
Assay 47-51%
Trace elemental impurities: parts per trillion level
Batch values reported on accompanying Certificate of Analysis
Application: Ultra trace inorganic analysis
For treatment of HF burns, calcium gluconate gel (ROMIL Code PCG9V) is recommended. In order to provide emergency first aid, it should be kept wherever HF is handled or stored.

Typical values, elemental impurities at time of manufacture (ppt):
Ag	<1	Cs	<0.5	K	<10	Pr	<0.1	Tb	<0.1
Al	<10	Cu	<10	La	<0.1	Pt	<10	Te	<1
As	<10	Dy	<0.1	Li	<1	Rb	<1	Th	<0.1
Au	<10	Er	<0.1	Lu	<0.1	Re	<0.1	Ti	<10
B	<10	Eu	<0.1	Mg	<5	Rh	<1	Tl	<0.1
Ba	<5	Fe	<10	Mn	<1	Ru	<1	Tm	<0.1
Be	<5	Ga	<1	Mo	<5	Sb	<10	U	<0.1
Bi	<0.1	Gd	<0.1	Na	<10	Sc	<1	V	<1
Ca	<10	Ge	<1	Nb	<5	Se	<50	W	<10
Cd	<0.1	Hf	<1	Nd	<0.1	Sm	<0.1	Y	<0.5
Ce	<0.1	Hg	<20	Ni	<10	Sn	<10	Yb	<0.1
Co	<1	Ho	<0.1	Pb	<1	Sr	<1	Zn	<5
Cr	<10	In	<0.1	Pd	<10	Ta	<20	Zr	<10
Typical values, anionic impurities at time of manufacture (ppb):
Total S <50

Hydrogen Peroxide UpA
Code SS92
Standard Pack 500ml (FEP)
R:34 S:3-28a-36/39-45 EC:[231-765-0]
H2O2 MW 34.01 d 1.10 CAS [7722-84-1]
Assay 30-32%
Trace elemental impurities: parts per trillion level
Batch values reported on accompanying Certificate of Analysis
Application: Ultra trace inorganic analysis

Typical values, elemental impurities at time of manufacture (ppt):
Ag	<10	Cs	<1	K	<10	Pr	<0.5	Te	<1
Al	<10	Cu	<5	La	<0.5	Rb	<5	Th	<0.5
As	<10	Dy	<0.5	Li	<1	Re	<5	Ti	<10
Au	<10	Er	<0.5	Lu	<0.5	Rh	<5	Tl	<1
B	<100	Eu	<0.5	Mg	<10	Ru	<10	Tm	<0.5
Ba	<5	Fe	<20	Mn	<5	Sb	<1	U	<0.5
Be	<5	Ga	<5	Mo	<5	Sc	<10	V	<5
Bi	<10	Gd	<0.5	Na	<10	Se	<50	W	<10
Ca	<50	Ge	<10	Nb	<1	Sm	<0.5	Y	<1
Cd	<1	Hf	<1	Nd	<0.5	Sn	<10	Yb	<0.5
Ce	<1	Hg	<20	Ni	<10	Sr	<1	Zn	<10
Co	<5	Ho	<0.5	Pb	<1	Ta	<10	Zr	<5
Cr	<5	In	<0.5	Pd	<10	Tb	<0.5

Nitric Acid UpA
Code SS12
Standard Pack 500ml (FEP)
R:35 S:23b-26-36-45 EC:[231-714-2]
HNO3 MW 63.01 d 1.42 CAS [7697-37-2]
Assay 67-69%
Trace elemental impurities: parts per trillion level
Batch values reported on accompanying Certificate of Analysis
Store in dark.
Application: Ultra trace inorganic analysis
Concentrated Nitric Acid can decompose to nitrogen oxides (NOx) through action of heat or light resulting in a yellow colouration. However, this does not affect the performance of the acid with respect to trace metals or oxidising power. Storage in a cool, dark place is recommended.

Typical values, elemental impurities at time of manufacture (ppt):
Ag	<2	Cs	<0.05	K	<5	Pr	<0.05	Tb	<0.01
Al	<10	Cu	<3	La	<0.05	Pt	<1	Te	<1
As	<10	Dy	<0.01	Li	<1	Rb	<1	Th	<0.05
Au	<10	Er	<0.01	Lu	<0.01	Re	<1	Ti	<10
B	<10	Eu	<0.01	Mg	<5	Rh	<1	Tl	<0.1
Ba	<1	Fe	<10	Mn	<2	Ru	<10	Tm	<0.01
Be	<5	Ga	<1	Mo	<1	Sb	<10	U	<0.01
Bi	<0.1	Gd	<0.01	Na	<5	Sc	<1	V	<1
Ca	<10	Ge	<1	Nb	<1	Se	<20	W	<5
Cd	<1	Hf	<0.05	Nd	<0.05	Sm	<0.01	Y	<1
Ce	<0.05	Hg	<20	Ni	<10	Sn	<10	Yb	<0.01
Co	<1	Ho	<0.01	Pb	<1	Sr	<1	Zn	<5
Cr	<10	In	<1	Pd	<10	Ta	<10	Zr	<1

Perchloric Acid UpA
Code SS22
Standard Pack 500ml (FEP)
R:5-8-35 S:23b-26-36-45 EC:[231-512-4]
HClO4 MW 100.46 d 1.66 CAS [7601-90-3]
Assay 65-71%
Trace elemental impurities: parts per trillion level
Batch values reported on accompanying Certificate of Analysis
Application: Ultra trace inorganic analysis

Typical values, elemental impurities at time of manufacture (ppt):
Ag	<2	Dy	<0.01	Lu	<0.01	Rb	<1	Tl	<0.1
Al	<100	Er	<0.01	Mg	<5	Rh	<1	Tm	<0.01
As	<100	Eu	<0.01	Mn	<2	Sb	<50	U	<0.01
Ba	<20	Fe	<10	Mo	<1	Sc	<1	V	<1
Be	<5	Ga	<1	Na	<5	Sm	<0.01	W	<5
Bi	<2	Gd	<0.01	Nb	<1	Sn	<10	Y	<1
Ca	<10	Hf	<0.05	Nd	<0.05	Sr	<1	Yb	<0.01
Cd	<1	Ho	<0.01	Ni	<10	Ta	<10	Zn	<5
Ce	<0.05	In	<1	Pb	<1	Tb	<0.01	Zr	<1
Co	<1	K	<5	Pd	<10	Te	<1
Cs	<0.05	La	<0.05	Pr	<0.05	Th	<0.05
Cu	<3	Li	<1	Pt	<1	Ti	<10

Sulphuric Acid UpA
Code SS32
Standard Pack 500ml (FEP)
R:35 S:26-30-45 EC:[231-639-5]
H2SO4 MW 98.07 d 1.84 CAS [7664-93-9]
Assay 93-98%
Trace elemental impurities: parts per trillion level
Batch values reported on accompanying Certificate of Analysis
Application: Ultra trace inorganic analysis

Typical values, elemental impurities at time of manufacture (ppt):
Ag	<5	Dy	<0.1	Li	<10	Rb	<1	Tl	<1
Al	<30	Er	<0.1	Lu	<0.1	Rh	<1	Tm	<0.1
As	<500	Eu	<0.1	Mg	<10	Sb	<10	U	<0.1
Ba	<10	Fe	<30	Mn	<1	Sc	<5	V	<5
Be	<5	Ga	<1	Mo	<10	Se	<500	W	<5
Bi	<1	Gd	<0.1	Na	<30	Sm	<0.1	Y	<1
Ca	<50	Ge	<100	Nb	<1	Sn	<50	Yb	<0.1
Cd	<1	Hf	<0.1	Nd	<0.1	Sr	<1	Zn	<20
Ce	<0.1	Hg	<50	Ni	<20	Ta	<20	Zr	<5
Co	<1	Ho	<0.1	Pb	<5	Tb	<0.1
Cr	<10	In	<1	Pd	<10	Te	<10
Cs	<1	K	<50	Pr	<0.1	Th	<0.1
Cu	<5	La	<1	Pt	<10	Ti	<50

Water UpA
Code SS02
Standard Pack 1LT (LDPE)
H2O MW 18.02 FP 0.0°C BP 100.0°C d 1.00
CAS [7732-18-5]
Trace elemental impurities: parts per trillion level
Trace anionic impurities: parts per billion level
Batch values reported on accompanying Certificate of Analysis
Equivalent to ASTM D1193 Type I
Application: Ultra trace inorganic analysis

Typical values, elemental impurities at time of manufacture (ppt):
Ag	<5	Cs	<0.1	K	<10	Pr	<0.1	Tb	<0.1
Al	<20	Cu	<5	La	<0.1	Pt	<1	Te	<1
As	<10	Dy	<0.1	Li	<1	Rb	<1	Th	<0.1
Au	<10	Er	<0.1	Lu	<0.1	Re	<1	Ti	<10
B	<20	Eu	<0.1	Mg	<5	Rh	<1	Tl	<0.1
Ba	<1	Fe	<10	Mn	<1	Ru	<1	Tm	<0.1
Be	<5	Ga	<1	Mo	<1	Sb	<10	U	<0.1
Bi	<0.1	Gd	<0.1	Na	<10	Sc	<1	V	<1
Ca	<10	Ge	<1	Nb	<1	Se	<50	W	<10
Cd	<1	Hf	<0.1	Nd	<0.1	Sm	<0.1	Y	<1
Ce	<0.1	Hg	<20	Ni	<10	Sn	<10	Yb	<0.1
Co	<1	Ho	<0.1	Pb	<1	Sr	<1	Zn	<10
Cr	<10	In	<1	Pd	<5	Ta	<10	Zr	<1
Typical values, anionic impurities at time of manufacture (ppb):
Cl	<1	PO4	<1	SO4	<1

Last updated 25 September 2009