ROMIL-SpA™ Super Purity Acids and Reagents Specifications

ROMIL-SpA™ Super Purity Acids and Reagents
A
B
C
D
E
F
G
H
I
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z

  • Methanol SpA

    low metals
    H413
    500ml H413P
    1LT H413M
    2½LT H413L
    Dgr H:225-301+311+331-370
    P:210-280f-302+352-309+310-403+235
    Wikipedia Page
    (Methyl Alcohol)
    CH3OH MW 32.04 BP 64.5°C d 0.79 CAS [67-56-1]
    Assay >99.9% Water <0.05% Residue <0.0001%
    Group 1 & 2 elements typically <0.5 ppb
    Group 3 to 12 (transition) elements typically <0.5 ppb
    Group 13, 14, 15 elements typically <0.5-<50 ppb
    Application: Environment Analysis (eg, using AAS, ICP-OES, ICP-MS), Trace Metal Analysis (for organic analysis and chromatography see ROMIL Code H410 Methanol SpS)
    Typical values, elemental impurities at time of manufacture (ppb):
    Ag<0.5Cd<0.5Mg<0.5Sn<0.5
    Al<0.5Co<0.5Mn<0.5Sr<0.5
    As<0.5Cr<0.5Mo<0.5Th<0.5
    B29Cu<0.5Na<0.5Ti<0.5
    Ba<0.5Fe<0.5Ni<0.5U<0.5
    Be<0.5Hg<0.5Pb<0.5V<0.5
    Bi<0.5K<0.5Sb1Zn<0.5
    Ca<0.5Li<0.5Se<0.5Zr<0.5
    500ml H413P
    1LT H413M
    2½LT H413L
    Dgr H:225-301+311+331-370
    P:210-280f-302+352-309+310-403+235

    • Methyl Alcohol (see Methanol)

  • Methyl iso-Butyl Ketone SpA

    H439
    500ml H439P
    2½LT H439L
    Dgr H:225-332-319-335-EUH066
    P:210-305+351+338-304+340
    Wikipedia Page
    (4-Methylpentan-2-one)
    (CH3)2CHCH2COCH3 MW 100.16 BP 117.4°C d 0.80 CAS [108-10-1]
    Assay >99.8% Water <0.01% Residue <0.0001%
    Group 1 & 2 elements typically <0.1-<250 ppb
    Group 3 to 12 (transition) elements typically <0.1-<100 ppb
    Group 13, 14, 15 elements typically <0.5-<100 ppb
    Peroxides (at time of manufacture) <0.0001% (<1 ppm)
    Application: Environment Analysis (eg, using AAS, ICP-OES, ICP-MS), Trace Metal Analysis (for organic analysis and chromatography see ROMIL Code H446 Methyl iso-Butyl Ketone SpS)
    500ml H439P
    2½LT H439L
    Dgr H:225-332-319-335-EUH066
    P:210-305+351+338-304+340

    • 4-Methylpentan-2-one (see Methyl iso-Butyl Ketone)

Analysis Method

Most elements are determined by high resolution ICP‑MS using sample preconcentration. The results are an average of three aliquots subsampled from three samples representative of the batch. The samples are slowly evaporated to dryness. The resulting residue is reconstituted in a small volume of 2% Nitric Acid / 2% Hydrogen Peroxide ROMIL‑UpA. Operations are conducted under Class 100 or better clean-room conditions. For volatile elements (eg, Hg), the acid samples are diluted then directly injected into the ICP‑MS. Values below 3 times the standard deviation of the blank are shown with '<', no blank value is subtracted.